DIYdiy projectslightingproducts

diy project: chris’ budget-friendly mod chandelier

by Kate Pruitt

I’m constantly growing tired of the lamps in my home. For the past few years, I’ve griped about how our landlord won’t allow us to change out fixtures, but it’s probably a blessing in disguise. I simply cannot settle on a light fixture, especially when there are so many great designs and lighting projects out there.

, the editor in chief at and a major DIY genius, has solved my problems with this cool mod chandelier. If you need a great dining table lighting statement, this project would be a smart way to go. It’s super fast and inexpensive to create, but it has a big impact. I really love how sculptural and dynamic it looks, especially in bright white and against that dark wall.

If you’re looking for more mid-century inspired projects, you should check out the Curbly published last year, which we loved here at D*S. In preparation for the gatherings and parties this season brings (you know you want to add some fun things to that to-do list!), you should also check out Chris’ , including rustic branch napkin rings. Thanks for sharing Chris! —

CLICK HERE for the full how-to after the jump!


  • lamp and cord pendant set, such as the ($3.99)
  • 10 3/16″ wood dowels, 36″-length ($.29/each; $2.90 total)
  • 1 can spray paint ($2.95)
  • saw or utility knife
  • hot glue gun and yellow (wood) glue sticks
  • two-part epoxy, Household Goop, or E6000 glue
  • tin snips or sharp scissors (optional)


1. Use the saw to cut the dowel rods in half once, giving you 20 lengths of 18″. Any type of saw will work here: a hand saw, coping saw, hacksaw, miter box or power miter saw. Since the dowels are so thin, you could even use a utility knife and hard surface.

2. Take one dowel rod and glue it onto the light cord set. Glue it at the center and at 90 degrees. This is the only point where the dowels actually touch the lamp, so make sure it’s a nice, strong joint. Yellow glue doesn’t love plastic, so I used a 2-part quick drying epoxy, but any strong glue will work here.

3. Once that joint has dried, insert a bulb so you have a sense of its weight as you work. Find some way to hang the light at a comfortable working height — the supports between the joists in a basement work perfectly. Warm up your glue gun, and insert yellow glue sticks. Glue two dowels at 90 degrees to the main support to begin creating your structure.

Note: Using glue approved for wood is essential here, and the quick drying time of hot glue means you don’t have to hold the dowels in place or use clamps. Awesome! Also, you’ll want use some kind of drop cloth or scrap surface under your work area to catch dripping hot glue.

4. Then continue to add dowels. Take your time and experiment with different angles and placements. Note that most of your dowels will be oriented more or less vertically, with just a few horizontal ones for support and balance. Be sure to move around the piece, noting how it looks from all angles. Of course, you’ll want to avoid trapping the bulb. Be sure there’s enough space to change it.

5. With practice, you’ll learn to use just the right amount of glue to make a strong joint without creating the crazy blobs and strings that hot glue tends to make. Keep an old pencil or junk piece of dowel handy to wipe away excess glue. Keep adding dowels until it looks finished. If you don’t need all 20, there’s no need to use them. My finished piece had 17.

6. At this point, I realized that some of my dowels extended a bit too far. Use tin snips or sharp scissors to cut the dowels to create an overall cube shape with balanced dimensions. I also used a hot soldering iron with a narrow tip to remove any excess glue globs.

7. Once everything has cured, take it outside or into a well-ventilated area and spray paint the whole thing. Remove any stickers or labels from the socket before painting — I didn’t and wish I had. And be sure to leave your dummy bulb in so no paint goes into the socket and messes with the connections. One coat of spray primer and one coat of white was enough for a perfectly glossy finish.


Getting it right. There were a few dowels placed early in the process with angles that I don’t totally love. It’s hard to get randomness to look just-so perfect. I definitely got better with practice, so take your time and envision how each dowel will look in the finished piece. Keep the cube shape in mind, and you’ll be set.

Durability. This thing is actually stronger than I thought it would be. No, it’s not welded steel, but I dropped it on the ground from four feet or so, and it survived with no problems. Obviously, you’ll need to be careful while moving it, but that’s true for most chandeliers. I’ve had it hanging above my dining table for two weeks, and everything is great. I have no idea how long it’ll last, but for less than $10.00, I’ll happily make more.

Suggested For You


Leave a Reply

Design*Droits-Humains reserves the right to restrict comments that do not contribute constructively to the conversation at hand, that comment on people's physical appearance, contain profanity, personal attacks, hate speech or seek to promote a personal or unrelated business. Our goal is to create a safe space where everyone (commenters, subjects of posts and moderators) feels comfortable to speak. Please treat others the way you would like to be treated and be willing to take responsibility for the impact your words may have on others. Disagreement, differences of opinion and heated discussion are welcome, but comments that do not seek to have a mature and constructive dialogue will not be published. We moderate all comments with great care and do not delete any lightly. Please note that our team (writers, moderators and guests) deserve the same right to speak and respond as you do, and your comments may be responded to or disagreed with. These guidelines help us maintain a safe space and work toward our goal of connecting with and learning from each other.