Quantcast

DIYdiy projects

DIY Josef Frank Inspired Menorah by David Stark Design

by Grace Bonney

Chanukah is most often a blue and white affair, sometimes with a little silver thrown in, sometimes a little gold. But in ruminating on the holiday, we couldn’t help but ask ourselves: “Why does it need to be?”

Now, we know that the bold, floral prints of are, perhaps, not the most likely of Chanukah inspirations, but that’s exactly the point. We turned to a pattern we love entitled, “” as inspiration for this vibrant menorah – the perfect pop of color as we move into the darker winter months! We chose colored papers and floral shapes influenced by the motifs and palettes found in the print and are thrilled to share this how-to with you!

We opted to make our menorah base. But, it would be equally as charming to use a classic menorah you already own and wrap the wire stems around it. Or, pick up an affordable one and paint it! (Thank you to for loaning us this great Josef Frank fabric!) –

 

Supplies

  • 1” x 4” wood board (cut to 20”)
  • Coping saw (or other hand saw) and clamps
  • Two 1” dowel rods (either 36” or 48” long)
  • Drill with 1”, 3/8”, and 1/16” drill bits
  • Ruler and pencil
  • Acrylic paint and paint brushes
  • Red and white gel pens
  • Scissors and craft knife
  • Permanent glue stick or hot glue gun
  • Wire cutters
  • Bone folder
  • 20-gauge straight wire (any color)
  • Various colors floral tape (we used: red, green, blue)
  • Various colors cover-weight paper (we used: red, hot pink, yellow, orange, blue)
  • Chanukah candles or LED candles
  • Craft cutter machine (optional)
  • PDF template (Link to download in Step 1 below)

Instructions

Step 1

Download the PDF template.

Using your ruler, find the center of the wood board and measure nine 2” intervals along that center line. Using your drill with the 1” drill bit, drill approximately ¼” deep holes at each mark. Use clamps to secure the board in place if needed.

Step 2

Using your ruler, measure eight 7” and one 9.5” lengths of dowel. Use your saw to cut each piece, being sure to cut as straight as possible. Use clamps to secure the dowels in place if needed.

Step 3

Assemble the menorah base by placing four 7” dowels at each end and the 9.5” dowel in the center. You may need to twist the dowels to secure them in place. Next, using your drill with the 3/8” drill bit, drill approximately ¼” deep holes on the end of each dowel. (3/8” is the width of our Chanukah candles, check yours before you begin and drill the appropriate size holes.)

Step 4

Paint your menorah! We painted a base color of dark green and added pale blue, turquoise, and grey dots. Allow the paint to dry fully.

Step 5

Use the template provided to cut out multiples of each shape. Or, use the SVG file to cut using a craft cutter.

Step 6

Using the red and white gel pens, add decorative details to the shapes and fold down the center or along each petal using a bone folder to press the crease.

Step 7

Apply a heavy layer of glue stick (or a line of hot glue) to the tab portion of each shape and press the wire into the glue. Once dry, cover the connection and the remaining length of wire with floral tape, occasionally attaching the wire stems together. For the yellow flowers, bend the wire and attach to the back of the flowers with hot glue.

Step 8

Using your drill with the 1/16” drill bit, drill holes into the menorah base and insert the wire stems into the holes. If you are using a menorah you already own, simply wrap the wires around it. We opted to keep our flowers low and pulled away from the candles. Be mindful of this when you are assembling. Dripped wax will not alight paper, but be cautious of the flames. We recommend if you are using this menorah with small children in the house, to use LED candles.

Suggested For You

Comments

  • That’s REALLY beautiful! But, I have a caution: I made something similar to this with some vintage cutouts, and when the candle burned down low it started a fire! Thankfully it was right on the table so we could toss water on it. But it happened in a flash of an instant. This lovely craft project looks to me like a major fire hazard. Please be careful!

  • beautiful and fun project. i guess it might make more sense to use this one for display and have a second menorah to do the actual candle lighting. either way, it is a great idea.

  • this is very beautiful and creative. but I agree it seems exceedingly dangerous. not just the paper but the candles should be placed within a metal base, not just in wooden dowels.

  • Best DIY tutorial Ive seen in a while, thank you D*S and David Stark Design for sharing. The instructions are clear, images are self-explanatory and I particularly love the bold shapes & colours. Thank you!

  • This is gorgeous! It’s so fun to see a brilliant Chanukkah post amongst all the other holiday offerings.

  • So colorful and fun! I don’t celebrate Hanukkah, but would love to adapt this project for a table centerpiece.

Leave a Reply

Design*Droits-Humains reserves the right to restrict comments that do not contribute constructively to the conversation at hand, contain profanity, personal attacks, hate speech or seek to promote a personal or unrelated business. Our goal is to create a safe space where everyone (commenters, subjects of posts and moderators) feels comfortable to speak. Please treat others the way you would like to be treated and be willing to take responsibility for the impact your words may have on others. Disagreement, differences of opinion and heated discussion are welcome, but comments that do not seek to have a mature and constructive dialogue will not be published. We moderate all comments with great care and do not delete any lightly. Please note that our team (writers, moderators and guests) deserve the same right to speak and respond as you do, and your comments may be responded to or disagreed with. These guidelines help us maintain a safe space and work toward our goal of connecting with and learning from each other.

x